|
|
|
|
|
|
|
|
|
|
|
|
|
|
MS20002C6 MIL SPEC COUNTERSUNK WASHER 3/8 ID
|
MS20002C7 MIL SPEC COUNTERSUNK WASHER 7/16 ID
|
MS20002C8 MIL SPEC COUNTERSUNK WASHER 1/2 ID
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MS20002C14 MIL SPEC COUNTERSUNK WASHER 7/8 ID
|
NAS1291-7 7/16-20 JETNUT, HEX HEAD
|
3/8-24 MIL SPEC BOLT, 12 POINT, 3/8in GRIP LENGTH, DRILLED HEAD
ID DESIGNS BOLT ON SPINDLE SNOUT BOLT
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NAS1804-08 1/2-20 MIL SPEC NUT, 12 POINT
|
4130 SPINDLE LOCK NUT WASHER N10
|
STUD, MOUNTING XA4F101, XA5C201, 12MM DIAMTER SHANK, 7/16-20, 7/16-20, 2.925" OAL
QUANTITY 1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7/16-20 MIL SPEC BOLT, 12 POINT, 1/2in GRIP LENGTH, DRILLED HEAD
ID DESIGNS UPRIGHT TO CALIPER ADAPTER BOLT
|
N10 LOCKING HUB NUT
THREAD MAJOR DIAMETER 1.967in
18 THREADS PER INCH
|
NL10 LOCKING HUB NUT
THREAD MAJOR DIAMETER 1.967in
18 THREADS PER INCH
LEFT HAND THREAD
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HIGH MISALIGNMENT SPACER FOR 1.00 BEARING W/ 1/2 BOLT AND 2.875 POCKET WIDTH
POCKET WIDTH IS BASED ON 1.375 WIDE BALL
SPACER IS OVERSIZED FOR POCKET AND SHOULD BE TURNED DOWN TO FIT
|
1/2-20 MIL SPEC BOLT, 12 POINT, 2in GRIP LENGTH
ID DESIGNS UPRIGHT CAP BOLT
|
HIGH MISALIGNMENT SPACER FOR 1.50 BEARING W/ 7/8 BOLT AND 4.00 SPACER
POCKET WIDTH IS BASED ON 1.375 WIDE BALL
SPACER IS OVERSIZED FOR POCKET AND SHOULD BE TURNED DOWN TO FIT
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UPRIGHT PIN CAP ASSEMBLY
|
1/2-20 MIL SPEC BOLT, 12 POINT, 3.375in GRIP LENGTH
ID DESIGNS, GEISER GEN 1, JIMCO CHAMPION, UPRIGHT STEERING ARM BOLT
|
7/8-14 MIL SPEC BOLT, 12 POINT, 5.25in GRIP LENGTH
UPRIGHT CLEVIS BOLT
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CALIPER ADAPTER 210mm RADIAL TO 6" AXIAL MOUNT.
FITS XA5C201/2, XA4F101/2, ALCON 210MM CALIPERS
|
ID DESIGNS GEN 1 FRONT HUB PACKAGE
|
|
|
